
++++++++++++++++++++++++++++++++++++++++++++++++++++++++
There are two images, one is just the copper, and the other shows the 
placement of the parts.

The relay, op-amp and 10uF capacitor go on the bottom of the board, and 
use through holes, all the other components go on top of the board.

The board size is 2.675 x 1.475 inches.

The zip contains both the eagle files and the gerber files.

B.T.W. you should plate lots of solder onto each of the solder pads on that 
board before you start, and also when you get the board manufactured 
don't get a soldermask, as it will cover the pads so you can't solder them.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++

